Cechy
- Kit: Partial
- Kolor: Steel
- Materiał: Steel
- Numer koncówki: 185-5,185-3,185-00,185-0,185-2,185-10,185-9,185-4,185-6,185-1
- Styl: Hex
- Waga dostawy: 0,068kg
- Wysokość wysyłki: 5mm
- Szerokość wysyłki: 79mm
- Długość wysyłki: 135mm
- UPC: 050806011199
Nr produktu: 080185185
050806011199 Wszystkie mają standardową długość 1" (2,5 cm) oraz ¼" (6,3 mm) trzpienie sześciokątne. Bity Phillips NIE są antypoślizgowe. Śruby z gniazdem kwadratowym znajdują się w RV, szafkach i innych miejscach. Kwadrat 1⁄8" pasuje do nowszych osłon kolby Remington.
Darmowa wysyłka od 999,00 zł.
Czas dostawy ok. 14-21 dni.
Good bits, marking size would improve 13-07-2018
Bits are hard enough to get the job done.
Cheaper to get a set, especially the "Other" set that includes 7 extra bits more than the Hex set, for only $1.00 more. Check it out! I got the Hex bit set to replace two bits on my Wheeler Fat wrench set. They were shorter than the Wheeler original bits, but will work OK. I put the other 8 bits in the case with the Fat Wrench.
Hate that the bits don't have size marked on them.
Wheeler's bits don't either. You can find the size in the master kit diagram.
I would bye again.
Comes up short 08-09-2014
Needs 2 more sizes, one smaller, one larger
Napotkaliśmy błąd podczas wczytywania tej zawartości. Odśwież stronę, aby kontynuować. Jeśli problem będzie się powtarzał, skontaktuj się z naszym działem obsługi klienta.